| Auto elevator, we adopt machines or hydraulic methods to park cars. Auto elevator can be used as garage auxiliary facility. There are many protection measures in the system, such as overweight alarming device, anti falling device, communication and voice navigating device.
Features：
1.Safe and reliable.
Hydraulic elevator has high security，in the power off situation，the descending button or the manual valve set in the parking case offer the help to land cars to the near floors .
2.It is no need of the driving motor on the top.
The motor can be set in any place ,so the system can make use of those places of uselessness due to its 4 to 5 square meters small space coverage.It is important to some special buildings.
3.Accurate aiming system
Ordinary elevators could not aim accurately by influences of weight capacity and other reasons.But elevators in this system adopt a design of automatic balance control，which could make the elevators aim accurately to ensure the stable operation.
4.Little noise.
The driving system of the elevators-pump，motor and the control valve，are in the liquid oil case to make the pump as a whole。The pump and the motor could work in the oil ，thus the noise can be lowered approximately.
5.Lttle top height
Mechanical transmission elevator reaches to 4.5 meters in height ，but 3.8 meters is enought for the hydraulic elevator .It is more convenient for the design of buildings。
6.It has no vertical pressure on the building
Vertical pressure of the motor on the top，car’s case ，weight are supported by the basement through hydraulic bowl. Sructure could be simplified with less cost according to the no- vertical-pressure design.
7.Convenient operation
Drivers could choose the floor for their cars，with the help of self-aiming system and automatic doors.
Rotating plate
It is the auxiliary equipment of the parking system which could be set at the gate or in the system，it could make cars change direction without driving.This equipment saves the space for direction changing，and offers convenience for cars’entry and exit.
|
Model |
Lifting
load
(kg) |
Speed
(m/s) |
car
(mm) |
Shaft
(mm) |
Door
Width
(mm) |
Car door
Landing
door |
Machine
room
(mm) |
|
A |
B |
C |
D |
E |
R |
T |
|
|
|
PQS zk |
2000 |
0.5 |
2500 |
6000 |
3950 |
6500 |
2500 |
Centeral
parting Double
folding type |
≥2500 |
≥2000 | |
